Inverter/Charger Installation Kit
Transcript is auto-generated.
foreign hey guys my name's Jake I'm a technician here with Pacific yacht systems and today we're showing you our new inverter charger installation kits so first off we have our 2000 victron multi-plus inverter charger it's 2000 inverter and 80 amp battery charger we're going to include the AC cabling for the input to the inverter charger and the output for all your inverted loads that you choose the DC components required to connect it so isolation switch fuse holder and fuse as well as all the DC cabling and it's going to come pre-terminated with lugs to go from the inverter charger to the switch to the isolation switch from the isolation switch we're going to go to a fuse holder and fuse holder directly to the Boss Bar and that's going to complete the connections on the positive side The Next Step would be using the negative cable directly back to the negative DC bus and as well don't forget chassis ground always can't forget that for your DC connections and label so you can see on this one we have inverter side so inverter connection into our inverter charger and then out of there to the switch all the fuse and then also your choice of remote so here we have the digital multi-control which is the basic control for the inverter charger but they'll also be the option for the serbo GX thanks for watching guys if you want more information you can check out the website where we have more articles conceptual diagrams thanks for watching English (auto-generated) Videolytics Tools Comp
